Ask MetaFilter. We’ve a Maytag 5000 Series with Steam dryer (because far it to a new house as I can tell, this is the manual) and have just moved.

Ask MetaFilter. We’ve a Maytag 5000 Series with Steam dryer (because far it to a new house as I can tell, this is the manual) and have just moved.

We now have a Maytag 5000 Series with Steam dryer (since far as i will inform, this is actually the manual) and now have just relocated it up to a brand new home. It possessed an adapter that is three-prong a 120V connection at our old household nevertheless the brand new spot has a four-prong connection (that we’m assuming, from the things I’ve read) is 240V.

We bought a four-prong cord (Amazon) and swapped out of the cords (using this guide) but chose to stop before plugging it in and get ”hmm, this might be a 120v unit. ”

Ever since then, calling and re re searching haven’t actually resulted in anybody attempting to do this—I have yet to get tales of people blowing away too much voltage to their dryers and likewise have not found much about people attempting to run them on various circuits with success or failure besides a couple of individuals attempting to run a 240V dryer for a 140V circuit. I discovered a references that are few the presence of transformers with this situation yet ihookup not a lot about installing them or whether which is appropriate or perhaps not.

Can there be a straightforward method to approach this issue therefore that people might have washing this week or should we simply scrap it and acquire a unique dryer?

I do not think you need to connect it in. Unless i am mistaken, that guide is actually for transforming a 240-V/2phase 3-pin (hot-hot-neutral) appliance up to a 4-pin outlet that is 240V2/phasehot-hot-neutral-ground). Your appliance, in line with the PDF you connected, is 120V/1phase and expects hot-neutral-ground.

So what does the applying’s old plug seem like? Can it is found by you with this range of socket kinds?

You could be in a position to transform it by ignoring one of several leads that are hot this would work electrically, but could be unsafe or not-code for some reason I do not realize about. published by hattifattener at 9:02 PM may 17, 2012

From your own Wikipedia list, brand new plug is NEMA 14-30 (left plug in this diagram) and old a person is NEMA 10-30 (wiki picture).

I would be inquisitive to treat it utilizing the plug that is”only one hot lead” approach. My introductory-circuit-class-level knowledge appears to state ”yes, that seems reasonable” as well as the remainder of my feeling claims ”which is most likely an idea that is bad some explanation I do not learn about.” Does other people have advice to provide with this front side?

The manual you connect to is for a fuel dryer, and, as hattifattener highlights, both of the plugs are for 220/240V.

I do believe you may need professional assistance to accomplish the plug transformation properly, but We doubt you want a dryer that is new. posted by jamjam at 10:00 PM may 17, 2012

I am perhaps maybe perhaps not an electrician at all, but based on the manual you connected (let’s assume that may be the proper one for the dryer you’ve got), it just expects a 120V 15- or connection that is 20-amp. This means that, a typical home socket. They do suggest that it be positioned on a split circuit serving just the dryer, which will be a good clear idea. This is why feeling as it’s a gasoline dryer: it does not require a huge amount of energy for heating as a dryer that is electric. You do have fuel right that is available?

You can get an electrician to transform the four-prong outlet that is 240V a normal 120V one, or you might simply link the dryer right to an ordinary three-prong 120V socket, bearing in mind so it should be by itself circuit. The manual suggests against electrical cords, and I also’d actually advise against long-lasting usage of an expansion cord for the dryer; that is a fire risk waiting to occur.

We’d second hattifattener’s advice to test the dryer for many type or sort of marking showing just what its energy needs are. The NEMA 10-30 cable you state it had before is for an ungrounded 240V connection, nevertheless the manual claims the dryer wants 120V grounded. The marking dish most likely gets the model that is full for the dryer if nothing else. posted by zachlipton at 10:04 PM may 17, 2012

The manual must be this 1.

The manual you url to is for just the gasoline type of the dryer, which only requires 120V. There is the version that is electric of dryer. The connection that is electrical called 120V/240V since the dryer motor is 120V plus the heating elements are 240V. The 3 or four wire connection provides both needed voltages.

Then it will properly provide the both 120V/240V voltages required for your dryer if your 4-wire cord matches your outlet. Begin to see the installation manual above.

One vitally important action is to eliminate the white cable in the dryer that has been attached to the green ground screw from the dryer and alternatively link that white wire regarding the dryer into the exact exact exact same center screw because the white cable from the cable. This connects basic to basic. Then link the green cable on the cable towards the green ground screw where in actuality the white wire was previously. The red and black colored are a couple of legs of 120V that go right to the two terminal that is outside. The 2 feet are each 120V and 180 levels out of period in order that they offer 240V for the heating elements. Among the legs provides 120V for the engine.

Be sure you recognize that past paragraph. The little white pigtail on the dryer was connected to the green ground screw so that neutral and ground are connected together with your old 3-wire cord, there is no separate ground in the cord, so on the dryer. This might be no further permitted within the electrical rule. There should be a split green ground cable. It to the center neutral screw so you must remove the white wire on the dryer that was connected to the green ground screw and instead connect. published by JackFlash at 10:04 PM may 17, 2012 [3 favorites]

@JackFlash et al.: many many thanks, i believe that most most likely solved a whole lot. We see given that We certainly from the incorrect manual, and that most likely caused most of the confusion into the above responses (and lots of correct guesses that my presumptions were wrong)—we have a pure electric dryer, no gasoline included.

Kommentera